Everglide Moyu Black (also known as Dark Jade) is a tactile switch that rivals Holy Pandas in terms of feel and tactility. Featuring a similiar top-rounded bump and actuation force, these are described as cleaner and sharper than Holy Pandas. The bump is positioned slightly higher than on the HP, meaning you will reach it faster on Moyu Blacks. Another distinctive feature is the housing made entirely of PBT, which results in a unique sound signature.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Very lightly factory lubed
• Materials:
  • Top and bottom housing: PBT
  • Stem: POM
  • Spring: Gold-plated stainless steel
• Click here to see the force curve (measured by Pylon)
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

A snappy tactile switch with a crisp, pronounced bump that starts high - this is the perfect budget alternative for Zeal switches.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Materials:
  • Top and bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated stainless steel
• Initial force: 45 g
• Actuation force: 55 g
• Bottom-out force: 62 g
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Ranked by ThereminGoat as the #2 best switch overall among all models he tested. Click here to read the review.

This fully transparent linear switch stands out not only for its unique appearance, but also for the extremely smooth and wobble-free experience it delivers. Available with 3 different spring weights to better suit your preference.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Lightly factory lubed
• Materials:
  • Top and bottom housing: Polycarbonate (PC)
  • Stem: Polycarbonate (PC)
  • Spring: Gold-plated stainless steel
• Initial force:
  • 38 gf for the 55 g variant
  • 45 gf for the 62 g variant
  • 55 gf for the 67 g variant
• Actuation force:
  • 55 gf for the 55 g variant
  • 62 gf for the 62 g variant
  • 67 gf for the 67 g variant
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Insanely smooth linear switch featuring a full-POM housing which results in a deep, thocky sound signature.

The stem is made from an UHMWPE blend to avoid the issue known as "stick slip" that affects other POM switches. All the materials used are known to be low-friction plastics, which further contributes to the smoothness.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Available with and without factory lube
• Materials:
  • Top and bottom housing: POM
  • Stem: P3 (UHMWPE blend with self-lubricating properties)
  • Spring: Gold-plated
• Actuation force: 48 g
• Bottom-out force: 63.5 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, simply clip off the extra 2 plastic legs)

Insanely smooth tactile switch featuring a full-POM housing, which results in a deep, thocky sound signature. The tactility is similiar to the renowned Durock's T1 switch, which is among the most popular tactiles in the keeb community.

The stem is made from an UHMWPE blend to avoid the issue known as "stick slip" that affects other POM switches. All the materials used are known to be low-friction plastics, which further contributes to the smoothness.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Available with and without factory lube
• Materials:
  • Top and bottom housing: POM
  • Stem: P3 (UHMWPE Blend with self-lubricating properties)
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)

This ultra-smooth linear switch is Durock's tribute to Kobe Bryant. Featuring a long-pole stem and extended spring, it offers a unique typing experience.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Factory lubed
• 13.45 mm long pole & extended spring
• Colorway inspired by the Los Angeles Lakers basketball team
• Materials:
  • Top housing: Nylon
  • Bottom housing: POM
  • Stem: LY (UPE blend)
  • Spring: Gold-plated
• Bottom-out force: 60 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.5 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)

BONUS: Buy in quantity of 5+ (50 switches) to receive an extra spacebar switch - a heavier version, with 80 g bottom-out and white stem.

Durock's latest innovation. These switches utilize JWICK's brand new molds with tighter tolerances, further minimizing housing and stem wobble. Absolutely no need for filming!

The unique design of the bottom housing allows the long-pole stem to still travel your standard 4 mm, while preserving the unique sound signature of long-pole switches. The new molds also introduce a removable light diffuser for better light permeability.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Available with and without factory lube
• Long-pole stem combined with unique bottom housing design
• Thick contact pins to prevent bending, while maintaining compatibility with hot-swap PCBs
• Removable light diffuser
• Materials:
  • Top housing: Translucent modified Polycarbonate (PC) and UPE blend
  • Bottom housing: Nylon
  • Stem: Modified POM
  • Spring: Gold-plated Japanese stainless steel
• Actuation force: 55 g (60g for the extra spacebar switch)
• Bottom-out force: 63.5 g (80 g for the extra spacebar switch)
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

A new linear switch from Durock with improvements towards the wobble thanks to the use of a BOX-style stem. Featuring a double-stage long spring and a long-pole stem, it offers a unique, very smooth typing experience.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style, BOX-style
• Factory lubed
• 13.1 mm long pole
• 2-stage long spring
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 62 g
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

One of the smoothest unlubed tactile switches, in a candy-like colorway. Featuring a BOX-style stem for reduced wobble and same tactility as Durock's staple T1 switch, but with a slightly shorter total travel.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style, BOX-style
• Unlubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.7 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

One of the smoothest unlubed linear switches, in a candy-like colorway. Featuring a BOX-style stem for reduced wobble.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style, BOX-style
• Unlubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 63.5 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.7 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Koala is a cute, creamy recolor of Durock's staple T1 switch, which is one of the most popular tactiles in the keeb community. The difference is in the available spring weights: you can choose between 62 g and 67 g bottom-out.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 62 g or 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, simply clip off the extra 2 plastic legs)

Durock's staple T1 switch is one of the most popular tactiles in the keeb community. It features a unique, satisfying "stepped" feel, opposed to the "rounded" tactility from Holy Pandas, along with the smoothness that Durock is known for.

Also available in the Smokey variant, the only difference being the appearance.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Available colors: Translucent Smokey, Transparent Clear
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Durock's staple T1 switch is one of the most popular tactiles in the keeb community. It features a unique, satisfying "stepped" feel, opposed to "rounded" tactility from Holy Pandas, along with the smoothness that Durock is known for.

Also available in the Clear variant, the only difference being the appearance.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Available colors: Translucent Smokey, Transparent Clear
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Get rid of rattle and improve your typing experience by replacing the crappy OEM stabilizers that your board came with.

NOTE: Durock, Everglide and JWICK stabilizers are identical and manufactured by the same company: JWICK (JWK). The only difference is the brand name.

Specifications:

• Available colors: Translucent Smokey, Transparent Clear, Piano (Panda)
• Housing material:
  • Smokey & Clear: Polycarbonate (PC)
  • Piano (Panda): Nylon
• Stem material:
  • Smokey & Clear: Polycarbonate (PC)
  • Piano (Panda): POM
• Gold-plated wire
• Compatibility: Plate Mount

Each kit includes:

• 1x 6.25u (WK) or 1x 7.25u (WKL) stabilizer
• 4x 2u stabilizers

Get rid of rattle and improve your typing experience by replacing the crappy OEM stabilizers that your board came with.

NOTE: Durock, Everglide and JWICK stabilizers are identical and manufactured by the same company - JWICK (JWK). The only difference is the brand name.

Click here for the premium version with gold-plated wires and wider material selection.

Specifications:

• Available colors: Black, White
• Housing material: Nylon
• Stem material: Nylon
• Steel wire
• Compatibility: Plate Mount

Each kit includes:

• 1x 6.25u (WK) or 1x 7.25u (WKL) stabilizer
• 4x 2u stabilizers