Genuine Krytox XHT-BDZ grease, repackaged into a leak-proof glass jar.

Each jar contains 10 grams of lube. That's a lot and should last you for several keyboard builds.

This is the best choice for eliminating all stabilizer rattle and ticking. Its extremely thick consistency and high viscosity provide outstanding dampening properties and make it stay in place incomparably better than dialectric grease (e.g. Permatex) and other Krytox lubricants (including the most commonly used 205g0), so you will never have to re-lube your stabs.

The large quantity of lubricant in the jar makes it easier to dip and evenly coat the stabilizer wires (in case you prefer this application method).

NOTE: Use it only on the wires, and remember: a little goes a long way. It's very easy to go overboard with this stuff, resulting in overlubed stabs that feel sticky and sluggish.

Download the Safety Data Sheet (MSDS)

Insanely smooth linear switch featuring a full-POM housing which results in a deep, thocky sound signature.

The stem is made from an UHMWPE blend to avoid the issue known as "stick slip" that affects other POM switches. All the materials used are known to be low-friction plastics, which further contributes to the smoothness.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Available with and without factory lube
• Materials:
  • Top and bottom housing: POM
  • Stem: P3 (UHMWPE blend with self-lubricating properties)
  • Spring: Gold-plated
• Actuation force: 48 g
• Bottom-out force: 63.5 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, simply clip off the extra 2 plastic legs)

Insanely smooth tactile switch featuring a full-POM housing, which results in a deep, thocky sound signature. The tactility is similiar to the renowned Durock's T1 switch, which is among the most popular tactiles in the keeb community.

The stem is made from an UHMWPE blend to avoid the issue known as "stick slip" that affects other POM switches. All the materials used are known to be low-friction plastics, which further contributes to the smoothness.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Available with and without factory lube
• Materials:
  • Top and bottom housing: POM
  • Stem: P3 (UHMWPE Blend with self-lubricating properties)
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)

This ultra-smooth linear switch is Durock's tribute to Kobe Bryant. Featuring a long-pole stem and extended spring, it offers a unique typing experience.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Factory lubed
• 13.45 mm long pole & extended spring
• Colorway inspired by the Los Angeles Lakers basketball team
• Materials:
  • Top housing: Nylon
  • Bottom housing: POM
  • Stem: LY (UPE blend)
  • Spring: Gold-plated
• Bottom-out force: 60 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.5 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)

BONUS: Buy in quantity of 5+ (50 switches) to receive an extra spacebar switch - a heavier version, with 80 g bottom-out and white stem.

Durock's latest innovation. These switches utilize JWICK's brand new molds with tighter tolerances, further minimizing housing and stem wobble. Absolutely no need for filming!

The unique design of the bottom housing allows the long-pole stem to still travel your standard 4 mm, while preserving the unique sound signature of long-pole switches. The new molds also introduce a removable light diffuser for better light permeability.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Available with and without factory lube
• Long-pole stem combined with unique bottom housing design
• Thick contact pins to prevent bending, while maintaining compatibility with hot-swap PCBs
• Removable light diffuser
• Materials:
  • Top housing: Translucent modified Polycarbonate (PC) and UPE blend
  • Bottom housing: Nylon
  • Stem: Modified POM
  • Spring: Gold-plated Japanese stainless steel
• Actuation force: 55 g (60g for the extra spacebar switch)
• Bottom-out force: 63.5 g (80 g for the extra spacebar switch)
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

A new linear switch from Durock with improvements towards the wobble thanks to the use of a BOX-style stem. Featuring a double-stage long spring and a long-pole stem, it offers a unique, very smooth typing experience.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style, BOX-style
• Factory lubed
• 13.1 mm long pole
• 2-stage long spring
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 62 g
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

One of the smoothest unlubed tactile switches, in a candy-like colorway. Featuring a BOX-style stem for reduced wobble and same tactility as Durock's staple T1 switch, but with a slightly shorter total travel.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style, BOX-style
• Unlubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.7 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

One of the smoothest unlubed linear switches, in a candy-like colorway. Featuring a BOX-style stem for reduced wobble.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style, BOX-style
• Unlubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 63.5 g
• Pre-travel (actuation): 2 mm
• Total travel: 3.7 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Koala is a cute, creamy recolor of Durock's staple T1 switch, which is one of the most popular tactiles in the keeb community. The difference is in the available spring weights: you can choose between 62 g and 67 g bottom-out.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 62 g or 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, simply clip off the extra 2 plastic legs)

Durock's staple T1 switch is one of the most popular tactiles in the keeb community. It features a unique, satisfying "stepped" feel, opposed to the "rounded" tactility from Holy Pandas, along with the smoothness that Durock is known for.

Also available in the Smokey variant, the only difference being the appearance.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Available colors: Translucent Smokey, Transparent Clear
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Durock's staple T1 switch is one of the most popular tactiles in the keeb community. It features a unique, satisfying "stepped" feel, opposed to "rounded" tactility from Holy Pandas, along with the smoothness that Durock is known for.

Also available in the Clear variant, the only difference being the appearance.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Available colors: Translucent Smokey, Transparent Clear
• Materials:
  • Top housing: Polycarbonate (PC)
  • Bottom housing: Polymer Nylon
  • Stem: POM
  • Spring: Gold-plated
• Bottom-out force: 67 g
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Get rid of rattle and improve your typing experience by replacing the crappy OEM stabilizers that your board came with.

NOTE: Durock, Everglide and JWICK stabilizers are identical and manufactured by the same company: JWICK (JWK). The only difference is the brand name.

Specifications:

• Available colors: Translucent Smokey, Transparent Clear, Piano (Panda)
• Housing material:
  • Smokey & Clear: Polycarbonate (PC)
  • Piano (Panda): Nylon
• Stem material:
  • Smokey & Clear: Polycarbonate (PC)
  • Piano (Panda): POM
• Gold-plated wire
• Compatibility: Plate Mount

Each kit includes:

• 1x 6.25u (WK) or 1x 7.25u (WKL) stabilizer
• 4x 2u stabilizers

Get rid of rattle and improve your typing experience by replacing the crappy OEM stabilizers that your board came with.

NOTE: Durock, Everglide and JWICK stabilizers are identical and manufactured by the same company - JWICK (JWK). The only difference is the brand name.

Click here for the premium version with gold-plated wires and wider material selection.

Specifications:

• Available colors: Black, White
• Housing material: Nylon
• Stem material: Nylon
• Steel wire
• Compatibility: Plate Mount

Each kit includes:

• 1x 6.25u (WK) or 1x 7.25u (WKL) stabilizer
• 4x 2u stabilizers

Genuine Krytox 206 Grade 0 (also called 206g0) grease lubricant, repackaged into a leak-proof glass jar.

Each jar contains 10 grams of lube, which is enough to cover over 400 switches. The exact number will depend on your skill and technique used.

Download the Safety Data Sheet (MSDS)

Genuine Krytox GPL 105 oil, repackaged into a translucent plastic bottle with dropper.

Each bottle contains 10 grams of lube.

Recommended for switch springs to eliminate pinging and crunching noises, as it can be swiftly applied to a full set of springs using a technique called bag lubing.

Can also be combined with other Krytox and TriboSys grease lubricants to thin the consistency as desired.

Download the Safety Data Sheet (MSDS)

Genuine Krytox GPL 205 Grade 0 (known as 205g0) grease, repackaged into a leak-proof glass jar.

Each jar contains 10 grams of lube, which is enough to generously cover over 400 switches. The exact number will depend on your skill and technique used.

Thanks to its versatility, it's undoubtedly the most popular choice in the mech community. Recommended mainly for Linear switches and stabilizer housings (the best choice for stab wires is Krytox XHT-BDZ), but can also be used with Tactile and Clicky switches (as long as you apply a very thin layer). It can even be applied to switch springs (although we think that Krytox 105 is a better choice for this purpose).

Grade 0 / g0 is simply another term for NLGI 0, which is the desired consistency for the purpose.

Download the Safety Data Sheet (MSDS)