Everglide Moyu Black (also known as Dark Jade) is a tactile switch that rivals Holy Pandas in terms of feel and tactility. Featuring a similiar top-rounded bump and actuation force, these are described as cleaner and sharper than Holy Pandas. The bump is positioned slightly higher than on the HP, meaning you will reach it faster on Moyu Blacks. Another distinctive feature is the housing made entirely of PBT, which results in a unique sound signature.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Very lightly factory lubed
• Materials:
  • Top and bottom housing: PBT
  • Stem: POM
  • Spring: Gold-plated stainless steel
• Click here to see the force curve (measured by Pylon)
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

A snappy tactile switch with a crisp, pronounced bump that starts high - this is the perfect budget alternative for Zeal switches.

Sold in packs of 10.

Specifications:

• Type: Tactile, MX-style
• Lightly factory lubed
• Materials:
  • Top and bottom housing: Nylon
  • Stem: POM
  • Spring: Gold-plated stainless steel
• Initial force: 45 g
• Actuation force: 55 g
• Bottom-out force: 62 g
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

Ranked by ThereminGoat as the #2 best switch overall among all models he tested. Click here to read the review.

This fully transparent linear switch stands out not only for its unique appearance, but also for the extremely smooth and wobble-free experience it delivers. Available with 3 different spring weights to better suit your preference.

Sold in packs of 10.

Specifications:

• Type: Linear, MX-style
• Lightly factory lubed
• Materials:
  • Top and bottom housing: Polycarbonate (PC)
  • Stem: Polycarbonate (PC)
  • Spring: Gold-plated stainless steel
• Initial force:
  • 38 gf for the 55 g variant
  • 45 gf for the 62 g variant
  • 55 gf for the 67 g variant
• Actuation force:
  • 55 gf for the 55 g variant
  • 62 gf for the 62 g variant
  • 67 gf for the 67 g variant
• Pre-travel (actuation): 2 mm
• Total travel: 4 mm
• 5-pin (if you need a 3-pin switch, just clip off the extra 2 plastic legs)
• LED compatibility: SMD & THT (through-hole)

It's a premade/preconfigured cable – ready to ship!

Looking for a high quality coiled cable that will match your mechanical keyboard perfectly? You don't have to wait months for a custom one.

Spice up your setup with our ready-made themed USB-C cables. Inspired by popular GMK keycap sets, featuring colorful aviator connectors, double sleeving and durable, springy reversed coils.

Colorway description:

›  Coiled part: dark grey paracord with clear PET sleeving
›  Straight part: dark grey paracord with clear PET sleeving
›  Heatshrink color: black
›  Aviator connector: yellow 5-pin GX16

Dimensions:

This is a handmade product, so the dimensions may vary slightly between units.

›  Coil length (unstretched): 19 cm ± 1 cm
›  Straight part length: 150 cm ± 5 cm
›  Coil outer diameter: 22 mm ± 1 mm

Technical specifications:

›  Connectors: USB-C (keyboard side) to USB-A (PC side)
›  USB standard: USB 2.0, supports 3A fast charging

Please note that real color may differ slightly from how it appears on your screen due to varying display settings. We try our best to make sure that the image you see here is as accurate as possible.

Niezbędnik każdego entuzjasty. Ten zestaw zawiera absolutnie wszystko, czego kiedykolwiek będziesz potrzebował do modyfikacji przełączników w swojej klawiaturze.

W jego skład wchodzi 8 narzędzi oraz akcesoriów – wszystkie w eleganckim, czarnym kolorze:

›  Aluminiowy Switch Opener (2 w 1) – magnetycznie zamykany, pozwala na otwarcie obudowy (housing) przełącznika. Kompatybilny z 95% przełączników, m.in. Cherry, Gateron, Kailh, Outemu oraz ich klonami. W razie wątpliwości skontaktuj się z nami.

›  Stem Holder – narzędzie umożliwiające wygodne przytrzymanie trzpienia (stem) przełącznika podczas smarowania, dzięki czemu nie ma ryzyka, że go upuścisz, a także nie pobrudzisz sobie rąk smarem.

›  Switch Puller – pozwala na łatwe wyjmowanie przełączników z klawiatury.

›  Keycap Puller – umożliwia łatwe zdejmowanie keycapsów z przełączników bez porysowania ich.

›  Dwa pędzelki: cienki oraz gruby – idealne do precyzyjnej aplikacji smaru.

›  Zakrzywiona pęseta antystatyczna ESD-15 – umożliwia nie tylko manipulację drobnymi elementami, ale także przetestowanie PCB Twojej klawiatury.

›  Filcowe etui z naszym logo – mieszczą się w nim wszystkie wymienione powyżej akcesoria.